UIAA and EN Mountaineering
| UIAA | Title | EN |
| UIAA101 | Dynamic mountaineering ropes | EN 892 |
| UIAA102 | Accessory cord | EN 564 |
| UIAA103 | Tape | EN 565 |
| UIAA104 | Slings | EN 566 |
| UIAA105 | Harnesses | EN 12277 |
| UIAA106 | Helmets for mountaineers | EN 12492 |
| UIAA107 | Low stretch ropes | EN 1891 |
| UIAA121 | Connectors: Type B – Base connector
Type H – HMS connector Type K – Via ferrata connector Type D – Directional connector Type A – Connector for specific anchorage Type Q – Screw gate connector Type X – Oval connector | EN 12275 |
| UIAA122 | Pitons | EN 569 |
| UIAA123 | Rock anchors | EN 959 |
| UIAA124 | Chocks | EN 12270 |
| UIAA125 | Frictional anchors | EN 12276 |
| UIAA126 | Rope clamps | EN 567 |
| UIAA127 | Pulleys | EN 12278 |
| UIAA128 | Energy absorbing systems for use in via ferrata climbing | EN 958 |
| UIAA151 | Ice anchors | EN 568 |
| UIAA152 | Ice-tools | EN 13089 |
| UIAA153 | Crampons | EN 893 |
| UIAA154 | Snow anchor |
EN PPE against falls from a height
| EN | Title |
| EN 341 | Descender devices |
| EN 353-1 | Guided type fall arresters including a rigid anchor line |
| EN 353-2 | Guided type fall arresters including a flexible anchor line |
| EN 354 | Lanyards |
| EN 355 | Energy absorbers |
| EN 358 | Belts for work positioning and restraint and work positioning lanyards |
| EN 360 | Retractable type fall arresters |
| EN 361 | Fall protection harness |
| EN 362 | Connectors: Classe B – Basic connectors
Classe A – Anchorage connectors Classe T – Terminal connectors Classe M – Multipurpose connectors Classe Q – Screw gate connectors |
| EN 363 | Personal fall protection systems |
| EN 364 | Test methods |
| EN 365 | General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging |
| EN 397 | Industrial safety helmets |
| EN 795 | Anchor devices: Classe A1 – Structural anchors designed to be secured to vertical, horizontal and inclined surfaces
Classe A2 – Structural anchors designed to be secured to inclined roofs Classe B – Transportable temporary anchor devices Classe C – Anchor devices employing horizontal flexible lines Classe D – Anchor devices employing horizontal rigid anchor rails Classe E – Deadweight anchors for use on horizontal surfaces |
| EN 813 | Sit harnesses |
| EN 1496 | Rescue lifting devices |
| EN 1497 | Rescue harnesses |
| EN 1498 | Rescue equipment – Rescue loops |
| EN 1868 | List of equivalent terms |
| EN 1891 | Low stretch kernmantel ropes |
| EN 12841 | Rope access systems: Classe A – Rope adjustment device
Classe B – Working line ascender Classe C – Working line descender |